Are you getting strike pattern prints repeatedly? And the HP Printer not aligning cartridges correctly? If yes, then you should not need to be bothered. In this guide, here you will get complete guidance on how to optimize print quality by aligning the ink cartridges in your HP printer to work correctly.

Therefore, the HP All-in-printer is very useful both personally and professionally, but sometimes many users complain about aligning cartridges failing error messages or printing quality which affects their work and they face trouble. However, one of the most common troubles is misalignment of the ink cartridges due to diverse factors and that’s why the printing device displays an error message of failed alignment and does not correctly print documents.

What Are the Reasons Your HP Printer Not Aligning Cartridges Correctly?

Here are the mentioned most common reasons why your printer HP Printer not aligning cartridges correctly.

  • Incorrect installation of ink cartridges
  • Clogged or dirty print heads
  • Firmware or software issues
  • Empty or low-ink cartridges
  • Incompatible ink cartridges
  • Damaged or fault-damaged print heads
  • Update Printer Drivers issue and many other reasons

Effective troubleshooting solutions to fix issues:

Solution 1: Check the Ink Cartridges Installed Correctly:

Make sure that your HP Printer is turned on and idle. For that, you will need to open the printer cartridge area, and there verify every ink cartridge to make sure it’s correctly installed and securely seated in its designated slot. In case, if any cartridge is inappropriately installed, then softly remove it and reinsert it

Solution 2: Restart the HP printer

When you see an HP Printer not aligning cartridges correctly, then to fix this issue, you would also turn off your HP printer device. This process will help to recover from printer errors or failures and fix the alignment.

How to do it?

  • Turn on your HP printer device, and remove the power cable at the printer’s backside.
  • Wait for one minute, and then RECONNECT the POWER CABLE.
  • Then the printer will TURN ON and will not display the ALIGNMENT FAILED ERROR.
  • Then you print a TEST PAGE to verify that the issue has been resolved.

Solution 3: Check the Alignment of the HP Printer

In some cases, the alignment failed HP printer error may be caused by aligning the incorrect cartridges. To fix the HP Printer not aligning cartridges correctly, check the HP alignment page to see the clear visibility.

  • Choose the loading of the CORRECT TYPE OF PRINTING PAPER in your HP printer’s INPUT TRAY.
  • Make sure your PRINTER DEVICE’S PRINT HEAD is not clogged.
  • The ink levels of your PRINTER DEVICE’S CARTRIDGE should not be short
  • Make sure that the printed alignment page is of GOOD QUALITY and does not carry faded ink traces.

Solution 4: Clean the Print Heads:

It is a good way to clean the Print Heads. For this, go to your printer’s control panel on your PC or laptop. Then, look for the cleaning or maintenance option. Start the print head cleaning process and complete it. After cleaning the process, try aligning the print heads again to see if the issue is resolved.