If you are taking the light error lightly so after sometimes, it can be a bigger issue. You can see that the HP printer does not recognize the memory card or USB drivers. If you are facing the same it can quickly be fixed after applying the appropriate solutions. If you wish to fix this issue then, read the given presented actual causes and solutions to this problem.

Conditions When HP Printer Not Recognizing Memory Card/USB Driver:

It is very irritating if your memory card or USB driver is not responding after inserting anything.

  • Driver problem: Due to corrupted or outdated drivers, you may face a USB driver or memory card issue.
  • Locked SD Card: If your memory card is not reading it has been locked state.
  • Poor Connection: After connecting the memory card, if it suddenly loses all the data or blinks, then there might be an issue with the USB ports.
  • Virus Issue: If the memory card or driver has been infected by the virus it will not respond.

Therefore, you may see the above-given conditions when you face problems with your driver or USB card.

How to Fix HP Printer Not Recognizing Memory Card/USB Drive Issue?

Here you can leverage the best possible solutions if the printer is connecting to a memory card or USB driver.

Reboot Your Computer:

First of all, you have to restart or reboot your computer and then, try to insert your memory card. Apart from that, after applying the below-given solution, you must check your USB card or driver after completing the restart facility.

Solution 1: Try to Use Different Port:

If the USB port is not responding you must try to use different ports on your computer.

Solution 2: Update Windows:

If you are using the memory card on Windows, you must update it using the below-given steps.

  • Earlier, you have to pick the SETTINGS menu.
  • After that, you must go to the UPDATE & SECURITY facility.
  • Now, choose the WINDOWS UPDATE.

Solution 3: Update Your Drivers:

  • Press and hold the R + WINDOWS KEY.
  • Then, reach the Device manager after writing the DEVMGMT. MSC.
  • Choose the Plus ICON from the BUS CONTROLLER option.
  • Hit on the UPDATE DRIVER.
  • Follow the process and choose the GENERIC USB HUB.

Solution 4: Resolve the USB Root Hub:

  • Again, reach the DEVICE MANAGER option.
  • Then, hit on the USB ROOT hub.
  • RIGHT-CLICK on it and then, tap on the PROPERTIES.
  • Hit on the POWER MANAGEMENT option.
  • Pick the ALLOW button to TURN OFF your computer.
  • After that, choose the OK button and then, RE-CONNECT the USB.

Solution 5: Re-install the USB device:

  • Before re-installation, you have to uninstall the USB device.
  • Pick the DEVICE MANAGER facility.
  • Choose the UNIVERSAL BUS CONTROLLER option.
  • Check the recently running USB DEVICE and RIGHT-CLICK on it.
  • Pick the UN-INSTALL option.
  • Wait for a FEW MINUTES and RE-INSTALL the USB device.