If your HP Printer displays an error message Toner Low or toner cartridge ended and it’s stopped printing work? Then it’s a bothersome situation. Do not worry. HP Printer Showing “Toner Low” Error or toner-ended warning sometimes occurs, due to various other causes. One of the particular reasons is that when the amount of toner in the cartridge is under a few percentages or ended.

Therefore, read this guide which will assist you to catch on how to identify the fault, and teach you the best possible methods to remove the error.

Efficient Methods to Fix HP Printer Showing “Toner Low” Error

Method 1: Restart the HP Printer

To fix the HP Printer Showing “Toner Low” Error, the first thing you should do is power the printer off for a few minutes. Yes, often, a simple power plug off of the printer, can fix various types of error code messages or warnings. So, follow these steps:

  • First, turn off your HP printer and PC, and unplug beginning the main power source.
  • Then, press and hold together the power button for at least 20-30 seconds.
  • Then plug it back and power on the printer and computer.
  • Then print a test page and check the issue is fixed.

In case, if the error message still occurs, so then continue to the next method.

Method 2: Check Cartridge is Not Empty

If the Printer displays a “Toner Low” Error message still, which means it, indicates the Toner is almost used and ended. So, after the toner is left, your HP printer will not print anything. Then to solve it, you would have to replace the empty toner cartridge with a new one quickly.

Method 3: Check the New Toner Cartridge is Installed Properly

If you are still receiving HP Printer Showing “Toner Low” Error or toner ended message! This means you have not installed the toner cartridge correctly. Then you would need to again remove the toner cartridge, and check that it’s installed properly.

Method 4: Verify for Protective Seal or Cover Tape

During the duration of installing a new toner cartridge, you must notice one thing it is not covered with a defensive tape or seal. Sometimes the defensive tape or seal can block the toner cartridge from being circulated properly.

Method 5: Update the Firmware

After a printer runs out of ink toner or toner ends warning appears, and the printer usually stops printing. That time, you should verify if there’s a firmware updating problem. Ensure the firmware update facility is available on your HP printer’s official support website. Occasionally, firmware updates can fix cartridge-associated problems.

Method 6: Reset the HP Printer

If the HP Printer Showing “Toner Low” Error, then you must try printer reset which will assist in removing the error. Follow these reset instructions:

  • Initially, turn off your printer.
  • Disconnect the power cord from the back of your printer.
  • Now, wait for a minimum of 40-50 seconds.
  • Then, reconnect the power cord to the back of the printer
  • Turn On the Printer and verify if the error is fixed.

Hence, in case, you still can’t fix the HP Printer Showing “Toner Low” Error. Then, you can call at HP toll-free phone number and talk with a customer support professional to get quick assistance.